1.Electrical parameters; Installation component: KLP-80, operating voltage: 8.2 VDC (intrinsic safety, NAMUR standard); Output mode: 2-wire system, NAMUR output; Switching frequency: 1 kHz; Unexcited current consumption ≤ 1.2 mA; excited current consumption ≥ 2.1 mA; reverse polarity protection: present;
2.Mechanical parameters: external dimensions: 23 × 14 × 16 mm; shell material: PA12-GF30 (glass fiber reinforced polyamide 12); Connection method: Cable connection (2m, gray, LifYY，PVC， Outer diameter 4 mm);
Environmental parameter protection level: IP67; Working 3.temperature: -25 ℃ to+70 ℃; Vibration resistance: 55 Hz (1 mm); Impact resistance: 30 g (11 ms);
4.Certification and other: ATEX II 2G Class Zone 1, ATEX II 1D Class Zone 20; Safety category: IEC 61508 SIL2 (low requirement mode), ISO 13849-1 PLc， Hardware fault-tolerant HFT0; IEC 61508 SIL3 (Full Requirement Mode), ISO 13849-1 PLe， Hardware fault-tolerant HFT1
About the sensor BIM-PST-YIX W/KLP-80
The sensor BIM-PST-YIX W/KLP-80 is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Environmental parameter protection level IP67; Working 3.temperature: -25 ℃ to+70 ℃; Vibration resistance: 55 Hz (1 mm); Impact resistance: 30 g (11 ms). This oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number sensor BIM-PST-YIX W/KLP-80 for accurate procurement and cross-referencing.
Why source the sensor BIM-PST-YIX W/KLP-80 from HDE123
- Verified part number: every sensor BIM-PST-YIX W/KLP-80 is checked against its manufacturer specification before shipment.
- 1 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the sensor BIM-PST-YIX W/KLP-80
To order the sensor BIM-PST-YIX W/KLP-80, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.