Basic information model: ATS48D17Q
Brand: Schneider Electric
Series: Altistart 48
Type: Three phase squirrel cage asynchronous motor soft start soft stop unit
Core applications: pumps, fans, compressors, conveyors, and other light/heavy industrial loads
Rated power: 7.5kW (400V, power side wiring, standard application)
Rated current: 17A (standard application); 14.8A (long-term operation)
Suitable voltage: Q series, 230-415V AC (-15% to+10%)
Frequency range: 50/60Hz (± 5%)
Protection level: IP20
Safety level: Cat II
Weight: 4.9kg
Dimensions (width x height x depth): 160mm x 275mm x 190mm
Electrical parameter main circuit: 6 thyristors, three-phase fully controlled
Power loss: 59W for standard applications; 46W for heavy-duty applications
Control power supply: 230-415V AC (taken from the main circuit)
Logic input: 4 channels, 24V DC@20mA
Logical output: 2 channels, 0.2A@30V DC
Relay output: 3 channels, 1.8A@230V AC/30V DC (inductive load, cosφ=0.5）
Analog output: 1 channel 0-20mA/4-20mA, maximum load 500 Ω
Communication interface: RS485, Modbus RTU, baud rate 4800/9600/19200bps
Control and protection control mode: ATS torque control (linear torque ramp), soft start/soft stop (adjustable from 0.5-30s)
Thermal protection: I ² t electronic (7-stage starting stage), PTC motor direct thermal protection
Fault protection: phase loss, overcurrent, underload, overvoltage, undervoltage, locked rotor, starting timeout, grounding fault
Additional functions: motor preheating, contactor bypass, self diagnosis, parameter locking
Application adaptation standard application: 230V delta wiring/400V power side wiring, 7.5kW
Heavy duty application: 400V delta connection, 11kW; 230V power supply side connection, 3kW
Starting limit: maximum starting current 5 × Ie
Suitable motor: three-phase squirrel cage asynchronous motor, capable of star/delta connection
Installation method: rail/panel installation, can be installed side by side
Environment and Standard Operating Temperature: -10 ℃ to+50 ℃ (Capacity Reduction: 50-60 ℃, 2% reduction per ℃)
Storage temperature: -25 ℃ to+70 ℃
Relative humidity: 5% -95% (no condensation)
Standards: EN/IEC 60947-4-2, EN 61800-5-1
Schneider soft starter original genuine ATS48D17Q 7.5KW Specifications
| Basic information model | ATS48D17Q |
|---|---|
| Brand | Schneider Electric |
| Series | Altistart 48 |
| Type | Three phase squirrel cage asynchronous motor soft start soft stop unit |
| Core applications | pumps, fans, compressors, conveyors, and other light/heavy industrial loads |
| Rated power | 7.5kW (400V, power side wiring, standard application) |
| Rated current | 17A (standard application); 14.8A (long-term operation) |
| Suitable voltage | Q series, 230-415V AC (-15% to+10%) |
| Frequency range | 50/60Hz (± 5%) |
| Protection level | IP20 |
| Safety level | Cat II |
| Weight | 4.9kg |
| Dimensions (width x height x depth) | 160mm x 275mm x 190mm |
| Electrical parameter main circuit | 6 thyristors, three-phase fully controlled |
| Power loss | 59W for standard applications; 46W for heavy-duty applications |
| Control power supply | 230-415V AC (taken from the main circuit) |
| Logic input | 4 channels, 24V DC@20mA |
| Logical output | 2 channels, 0.2A@30V DC |
| Relay output | 3 channels, 1.8A@230V AC/30V DC (inductive load, cosφ=0.5） |
| Analog output | 1 channel 0-20mA/4-20mA, maximum load 500 Ω |
| Communication interface | RS485, Modbus RTU, baud rate 4800/9600/19200bps |
| Control and protection control mode | ATS torque control (linear torque ramp), soft start/soft stop (adjustable from 0.5-30s) |
| Thermal protection | I ² t electronic (7-stage starting stage), PTC motor direct thermal protection |
| Fault protection | phase loss, overcurrent, underload, overvoltage, undervoltage, locked rotor, starting timeout, grounding fault |
About the Schneider soft starter original genuine ATS48D17Q 7.5KW
The Schneider Electric Schneider soft starter original genuine ATS48D17Q 7.5KW is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Basic information model ATS48D17Q, Brand Schneider Electric, Series Altistart 48. Manufactured by Schneider Electric, this oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number Schneider soft starter original genuine ATS48D17Q 7.5KW for accurate procurement and cross-referencing.
Why source the Schneider soft starter original genuine ATS48D17Q 7.5KW from HDE123
- Verified part number: every Schneider soft starter original genuine ATS48D17Q 7.5KW is checked against its manufacturer specification before shipment.
- 24 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the Schneider soft starter original genuine ATS48D17Q 7.5KW
To order the Schneider Electric Schneider soft starter original genuine ATS48D17Q 7.5KW, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.