Basic information model: ATV310HU75N4A
Brand: Schneider Electric
Series: Easy Altivar 310
Type: Three phase input, three-phase output universal frequency converter
Suitable motor: three-phase asynchronous motor
Rated power: Heavy load 7.5kW (10HP); Standard load 11kW (15HP)
Rated current: Heavy load 17A; Standard load 20A
Suitable voltage: three-phase 380-460V AC (-15% to+10%)
Frequency range: 50/60Hz (± 5%)
Protection level: IP20
Installation method: panel installation, can be installed side by side
Dimensions (width x height x depth): 150mm x 171mm x 232mm
Weight: 3.7kg
Electrical parameter output voltage: 0-460V AC (adjustable with output frequency)
Output frequency: 0.5-400Hz
Switching frequency: default 4kHz, adjustable from 2-12kHz
Power loss: Approximately 28.83W under standard operating conditions
Control power supply: independent circuit, no external power supply required
Logic input: 4 channels, 24V DC (18-30V), input impedance 3.5k Ω
Logic output: 1 relay output (1A/250V AC, 1A/30V DC)
Analog input: 2 channels (0-10V/0-5V optional, 30k Ω)
Analog output: 1 channel (0-20mA/4-20mA optional, maximum load 500 Ω)
Communication interface: RS485, supports Modbus RTU, configurable baud rate
Built in EMI filter: Yes
Performance parameter control methods: V/f control, sensorless flux vector control (SLVC)
Speed range: 1:20
Overload capacity: 150% rated current, lasting for 60 seconds
Starting torque: 170-200% rated torque (depending on motor parameters)
Braking method: DC injection braking, can be connected to an external braking resistor (maximum braking torque of 150% of rated torque)
Cooling method: forced air cooling
Efficiency: Approximately 95% (typical operating conditions)
Protection functions include overcurrent, overvoltage, undervoltage, overheating, short circuit, motor phase loss, ground fault, overload protection (electronic thermal relay), input phase loss protection
Environment and standard operating temperature: -10 ℃ to+55 ℃ (without capacity reduction)
Storage temperature: -25 ℃ to+70 ℃
Relative humidity: 5% -95% (no condensation)
Compliant with standards: EN/IEC 61800-5-1, UL 508C, CE, RoHS
Schneider inverter ATV310HU75N4A 7.5kW Specifications
| Basic information model | ATV310HU75N4A |
|---|---|
| Brand | Schneider Electric |
| Series | Easy Altivar 310 |
| Type | Three phase input, three-phase output universal frequency converter |
| Suitable motor | three-phase asynchronous motor |
| Rated power | Heavy load 7.5kW (10HP); Standard load 11kW (15HP) |
| Rated current | Heavy load 17A; Standard load 20A |
| Suitable voltage | three-phase 380-460V AC (-15% to+10%) |
| Frequency range | 50/60Hz (± 5%) |
| Protection level | IP20 |
| Installation method | panel installation, can be installed side by side |
| Dimensions (width x height x depth) | 150mm x 171mm x 232mm |
| Weight | 3.7kg |
| Electrical parameter output voltage | 0-460V AC (adjustable with output frequency) |
| Output frequency | 0.5-400Hz |
| Switching frequency | default 4kHz, adjustable from 2-12kHz |
| Power loss | Approximately 28.83W under standard operating conditions |
| Control power supply | independent circuit, no external power supply required |
| Logic input | 4 channels, 24V DC (18-30V), input impedance 3.5k Ω |
| Logic output | 1 relay output (1A/250V AC, 1A/30V DC) |
| Analog input | 2 channels (0-10V/0-5V optional, 30k Ω) |
| Analog output | 1 channel (0-20mA/4-20mA optional, maximum load 500 Ω) |
| Communication interface | RS485, supports Modbus RTU, configurable baud rate |
| Built in EMI filter | Yes |
About the Schneider inverter ATV310HU75N4A 7.5kW
The Schneider Electric Schneider inverter ATV310HU75N4A 7.5kW is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Basic information model ATV310HU75N4A, Brand Schneider Electric, Series Easy Altivar 310. Manufactured by Schneider Electric, this oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number Schneider inverter ATV310HU75N4A 7.5kW for accurate procurement and cross-referencing.
Why source the Schneider inverter ATV310HU75N4A 7.5kW from HDE123
- Verified part number: every Schneider inverter ATV310HU75N4A 7.5kW is checked against its manufacturer specification before shipment.
- 24 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the Schneider inverter ATV310HU75N4A 7.5kW
To order the Schneider Electric Schneider inverter ATV310HU75N4A 7.5kW, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.