1、 Pressure parameters:
Maximum intake pressure: 250 PSI (17.2 bar) (metal cup standard pressure resistance);
Pressure regulation output range: 2-125 PSI (0.14-8.6 bar), relief type pressure regulation;
Normal working pressure drop: about 2 psi; The maximum recommended pressure drop for filter blockage is 10 psi
2、 Interface specifications:
Main inlet and outlet: 1/4 “NPT internal thread;
Pressure gauge pressure tap: 2 1/4 “NPT (can also serve as a backup outlet);
Automatic drainage external nozzle: 1/8 “hose connector (this machine uses manual rotary drainage)
3、 Filtration and Drainage:
Filtration accuracy: 40 μ m particle filter cartridge (spare part model PS701P);
Type of water cup: Metal Bowl;
Drainage method: manual rotary drainage (Twist Drain);
Reservoir volume: 1.75 oz (approximately 51.7ml); Total cup capacity 4.4 oz
4、 Traffic performance:
Standard flow rate: 45-46 SCFM (ANR standard operating conditions);
Conversion flow rate: ≈ 1274-1302 L/min, 28.8 dm ³/s
5、 Temperature range:
Working environment medium temperature: 0 ℃~80 ℃ (32 ℉~175 ℉);
The plastic transparent cup has a maximum temperature of only 52 ℃, while this metal cup is heat-resistant
6、 Material configuration:
Valve body shell: Zinc alloy;
Sealing membrane/gasket: Nitrile rubber;
Adjusting spring and valve seat: stainless steel/carbon steel;
Adjustment knob and internal bracket: made of engineering plastic;
Water cup: Metal pressure cup
AIR FILTER REGULATOR • Part No:06E13A18AC Specifications
| Maximum intake pressure | 250 PSI (17.2 bar) (metal cup standard pressure resistance) |
|---|---|
| Pressure regulation output range | 2-125 PSI (0.14-8.6 bar), relief type pressure regulation |
| Normal working pressure drop | about 2 psi; The maximum recommended pressure drop for filter blockage is 10 psi |
| Main inlet and outlet | 1/4 "NPT internal thread |
| Pressure gauge pressure tap | 2 1/4 "NPT (can also serve as a backup outlet) |
| Automatic drainage external nozzle | 1/8 "hose connector (this machine uses manual rotary drainage) |
| Filtration accuracy | 40 μ m particle filter cartridge (spare part model PS701P) |
| Type of water cup | Metal Bowl |
| Drainage method | manual rotary drainage (Twist Drain) |
| Reservoir volume | 1.75 oz (approximately 51.7ml); Total cup capacity 4.4 oz |
| Standard flow rate | 45-46 SCFM (ANR standard operating conditions) |
| Conversion flow rate | ≈ 1274-1302 L/min, 28.8 dm ³/s |
| Working environment medium temperature | 0 ℃~80 ℃ (32 ℉~175 ℉) |
| Valve body shell | Zinc alloy |
| Sealing membrane/gasket | Nitrile rubber |
| Adjusting spring and valve seat | stainless steel/carbon steel |
| Adjustment knob and internal bracket | made of engineering plastic |
| Water cup | Metal pressure cup |
About the AIR FILTER REGULATOR • Part No:06E13A18AC
The AIR FILTER REGULATOR • Part No:06E13A18AC is a hydraulic & pneumatic products used in industrial automation, control and power systems. It is rated at Maximum intake pressure 250 PSI (17.2 bar) (metal cup standard pressure resistance), Pressure regulation output range 2-125 PSI (0.14-8.6 bar), relief type pressure regulation, Normal working pressure drop about 2 psi; The maximum recommended pressure drop for filter blockage is 10 psi. This hydraulic & pneumatic products is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number AIR FILTER REGULATOR • Part No:06E13A18AC for accurate procurement and cross-referencing.
Why source the AIR FILTER REGULATOR • Part No:06E13A18AC from HDE123
- Verified part number: every AIR FILTER REGULATOR • Part No:06E13A18AC is checked against its manufacturer specification before shipment.
- 18 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the AIR FILTER REGULATOR • Part No:06E13A18AC
To order the AIR FILTER REGULATOR • Part No:06E13A18AC, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.