Part No.: DT11313
Description: Locking pin
Brand: Barksdale, matching joystick 900-23-2 / 900-23-3 & valve cover 694-82-0 for Series 9000 manual hydraulic valves
Core Function
Mechanically locks joystick position by inserting into aligned holes of joystick base and valve cover; avoids accidental neutral reset caused by hydraulic shock & machine vibration, maintains circuit pressure holding.
Universal for both gang-release joystick (900-23-2) and standard mode joystick (900-23-3).
Hand pluggable design: insert pin for pressure holding; remove pin to allow auto spring return to neutral.
Material & Dimension Specs
Material: Precision turned 45# carbon steel, black oxide anti-rust finish, oil & abrasion resistant
Structure: Cylindrical shaft with stop shoulder to prevent full penetration loss, small pull tab for easy manual removal
Diameter: 4 mm, overall length: 22 mm, fits standard locating holes of 694-82-0 valve cover
Net weight: 0.012 kg
Environmental & Hydraulic Compatibility
Max matched circuit pressure: 350 psi (24 bar) low-pressure pilot loop
Temperature range: Fluid -20~+80℃, ambient -30~+70℃
IP54 dust & oil splash resistance
Compatible fluid: Anti-wear hydraulic oil, dry compressed air; incompatible with water glycol fire-resistant fluid
Key Advantages
Integral stop shoulder eliminates risk of pin dropping inside valve assembly
Quenched & tempered high hardness, no deformation after frequent plug/unplug cycles
Standard interchangeable spare part for single valve or multi-spool manifold assemblies
Compact size with zero extra cabinet space occupation
BarksdaleDT11313 Locking pin Specifications
| Part No | DT11313 |
|---|---|
| Description | Locking pin |
| Brand | Barksdale, matching joystick 900-23-2 / 900-23-3 & valve cover 694-82-0 for Series 9000 manual hydraulic valves |
| Hand pluggable design | insert pin for pressure holding; remove pin to allow auto spring return to neutral. |
| Material | Precision turned 45# carbon steel, black oxide anti-rust finish, oil & abrasion resistant |
| Structure | Cylindrical shaft with stop shoulder to prevent full penetration loss, small pull tab for easy manual removal |
| Diameter | 4 mm, overall length: 22 mm, fits standard locating holes of 694-82-0 valve cover |
| Net weight | 0.012 kg |
| Max matched circuit pressure | 350 psi (24 bar) low-pressure pilot loop |
| Temperature range | Fluid -20~+80℃, ambient -30~+70℃ |
| Compatible fluid | Anti-wear hydraulic oil, dry compressed air; incompatible with water glycol fire-resistant fluid |
About the BarksdaleDT11313 Locking pin
The Barksdale, matching joystick 900-23-2 / 900-23-3 & valve cover 694-82-0 for Series 9000 manual hydraulic valves BarksdaleDT11313 Locking pin is a electrical products used in industrial automation, control and power systems. It is rated at Part No DT11313, Description Locking pin, Brand Barksdale, matching joystick 900-23-2 / 900-23-3 & valve cover 694-82-0 for Series 9000 manual hydraulic valves. Manufactured by Barksdale, matching joystick 900-23-2 / 900-23-3 & valve cover 694-82-0 for Series 9000 manual hydraulic valves, this electrical products is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number BarksdaleDT11313 Locking pin for accurate procurement and cross-referencing.
Why source the BarksdaleDT11313 Locking pin from HDE123
- Verified part number: every BarksdaleDT11313 Locking pin is checked against its manufacturer specification before shipment.
- 11 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the BarksdaleDT11313 Locking pin
To order the Barksdale, matching joystick 900-23-2 / 900-23-3 & valve cover 694-82-0 for Series 9000 manual hydraulic valves BarksdaleDT11313 Locking pin, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.