1、 Core hydraulic performance parameters:
Rated power of supporting motor: 7.5 kW (2-pole three-phase asynchronous motor)
Rated head: 50 meters
Rated flow rate: 25 m ³/h (6.94 L/s)
Rated speed: 2900 r/min (2950r/min)
Pump efficiency: 58%
Required NPSHr: 2.5 m
Outer diameter of impeller: 194 mm
Maximum working pressure: 1.6 MPa
2、 Electrical parameters:
Power supply: three-phase AC 380V/50Hz
Motor protection level: IP54
Insulation level: F level
Motor model: Y132S2-2
3、 Mechanical and Interface Specifications:
Import and export flange diameter: DN65 (2.5 inches), flange standard GB/T9113
Structural form: Vertical pipeline installation (can be directly connected to the pipeline), horizontal ISW base installation
Material of overcurrent components: pump body/impeller HT200 cast iron; Mechanical seal graphite silicon carbide
Transport medium: room temperature clean water, cold and hot circulating water, medium temperature 0~120 ℃
Medium requirements: Solid particle content ≤ 0.1%, particle diameter ＜ 0.2mm
Pipeline centrifugal pump, power 7.5kW/lift 50m/caliber 2.5-inch/380V Specifications
| Rated power of supporting motor | 7.5 kW (2-pole three-phase asynchronous motor) |
|---|---|
| Rated head | 50 meters |
| Rated flow rate | 25 m ³/h (6.94 L/s) |
| Rated speed | 2900 r/min (2950r/min) |
| Pump efficiency | 58% |
| Required NPSHr | 2.5 m |
| Outer diameter of impeller | 194 mm |
| Maximum working pressure | 1.6 MPa |
| Power supply | three-phase AC 380V/50Hz |
| Motor protection level | IP54 |
| Insulation level | F level |
| Motor model | Y132S2-2 |
| Import and export flange diameter | DN65 (2.5 inches), flange standard GB/T9113 |
| Structural form | Vertical pipeline installation (can be directly connected to the pipeline), horizontal ISW base installation |
| Material of overcurrent components | pump body/impeller HT200 cast iron; Mechanical seal graphite silicon carbide |
| Transport medium | room temperature clean water, cold and hot circulating water, medium temperature 0~120 ℃ |
| Medium requirements | Solid particle content ≤ 0.1%, particle diameter ＜ 0.2mm |
About the Pipeline centrifugal pump, power 7.5kW/lift 50m/caliber 2.5-inch/380V
The Pipeline centrifugal pump, power 7.5kW/lift 50m/caliber 2.5-inch/380V is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Rated power of supporting motor 7.5 kW (2-pole three-phase asynchronous motor), Rated head 50 meters, Rated flow rate 25 m ³/h (6.94 L/s). This oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number Pipeline centrifugal pump, power 7.5kW/lift 50m/caliber 2.5-inch/380V for accurate procurement and cross-referencing.
Why source the Pipeline centrifugal pump, power 7.5kW/lift 50m/caliber 2.5-inch/380V from HDE123
- Verified part number: every Pipeline centrifugal pump, power 7.5kW/lift 50m/caliber 2.5-inch/380V is checked against its manufacturer specification before shipment.
- 17 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the Pipeline centrifugal pump, power 7.5kW/lift 50m/caliber 2.5-inch/380V
To order the Pipeline centrifugal pump, power 7.5kW/lift 50m/caliber 2.5-inch/380V, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.