1. Pressure and operating parameters:
Rated working pressure: ≤ 1.0MPa (specified in the order)
Maximum temperature of the medium: ≤ 150 ℃ (standard type at room temperature)
Applicable medium specific gravity: ≥ 0.85g/cm ³ (fuel, lubricating oil, sewage, fresh water are all acceptable)
Liquid level switching difference (action dead zone): 20-70mm
Repetitive control accuracy: ≤ 20mm
2. Structure and installation form:
Installation method: Side mounted flange horizontal installation (horizontal side mounted)
Control type: Single point two position SPDT single pole double throw switch (one set normally open+one set normally closed)
Flange standard: GB2506 marine flange, DN100 cast steel flange, in compliance with GB571-65 ship standard
Float ball specification: 304 stainless steel float ball, diameter Φ 60mm
Driving principle: magnetic coupling non-contact transmission, isolated sealing, liquid does not enter the switch chamber
3. Electrical contact parameters:
AC load: AC220V/380V, resistive 10A, inductive 0.5A
DC load: DC125V, 0.6A
Output: Passive switch signal, directly connected to PLC, alarm buzzer, solenoid valve start stop circuit
4. Protection, Explosion proof and Material:
Protection level: IP68 (can be immersed in water for a short time, resistant to salt spray and ship shaking)
Shell/Float Material: 304 Stainless Steel Body, Aluminum Alloy Wiring Shell
Explosion proof optional (same series C-B model): Ex d IIBT3~T5 explosion-proof, used in flammable and explosive oil tank areas
Environmental adaptability: resistant to moisture and heat, resistant to ship tilting and turbulence, meeting the inspection requirements of CCS classification society
JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA Specifications
| Rated working pressure | ≤ 1.0MPa (specified in the order) |
|---|---|
| Maximum temperature of the medium | ≤ 150 ℃ (standard type at room temperature) |
| Applicable medium specific gravity | ≥ 0.85g/cm ³ (fuel, lubricating oil, sewage, fresh water are all acceptable) |
| Repetitive control accuracy | ≤ 20mm |
| Installation method | Side mounted flange horizontal installation (horizontal side mounted) |
| Control type | Single point two position SPDT single pole double throw switch (one set normally open+one set normally closed) |
| Flange standard | GB2506 marine flange, DN100 cast steel flange, in compliance with GB571-65 ship standard |
| Float ball specification | 304 stainless steel float ball, diameter Φ 60mm |
| Driving principle | magnetic coupling non-contact transmission, isolated sealing, liquid does not enter the switch chamber |
| AC load | AC220V/380V, resistive 10A, inductive 0.5A |
| DC load | DC125V, 0.6A |
| Output | Passive switch signal, directly connected to PLC, alarm buzzer, solenoid valve start stop circuit |
| Protection level | IP68 (can be immersed in water for a short time, resistant to salt spray and ship shaking) |
| Shell/Float Material | 304 Stainless Steel Body, Aluminum Alloy Wiring Shell |
About the JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA
The JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA is a hydraulic & pneumatic products used in industrial automation, control and power systems. It is rated at Rated working pressure ≤ 1.0MPa (specified in the order), Maximum temperature of the medium ≤ 150 ℃ (standard type at room temperature), Applicable medium specific gravity ≥ 0.85g/cm ³ (fuel, lubricating oil, sewage, fresh water are all acceptable). This hydraulic & pneumatic products is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA for accurate procurement and cross-referencing.
Why source the JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA from HDE123
- Verified part number: every JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA is checked against its manufacturer specification before shipment.
- 14 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA
To order the JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.