Nominal size: 03 series
Maximum working pressure: 25 MPa (250 kgf/cm²)
Maximum rated flow: 80 L/min
Cracking pressure (code 20): 0.2 MPa
Pilot piston area ratio: 2:1 (main valve), 13.7:1 (auxiliary valve)
Control port: W type, synchronously controls A & B oil circuits
Mounting type: Stack installation on manifold block, flat gasket sealing
Compatible hydraulic fluid: Anti-wear mineral oil, water-glycol liquid, phosphate ester fire-resistant hydraulic oil
Operating temperature: -10 ℃ ~ +70 ℃
Applicable fluid viscosity: 15 ~ 400 mm²/s
Standard seal material: NBR nitrile rubber; FKM fluororubber optional for anti-fire oil
MP-03W-20- 40，DAIKIN Specifications
| Nominal size | 03 series |
|---|---|
| Maximum working pressure | 25 MPa (250 kgf/cm²) |
| Maximum rated flow | 80 L/min |
| Cracking pressure (code 20) | 0.2 MPa |
| Pilot piston area ratio | 2:1 (main valve), 13.7:1 (auxiliary valve) |
| Control port | W type, synchronously controls A & B oil circuits |
| Mounting type | Stack installation on manifold block, flat gasket sealing |
| Compatible hydraulic fluid | Anti-wear mineral oil, water-glycol liquid, phosphate ester fire-resistant hydraulic oil |
| Operating temperature | -10 ℃ ~ +70 ℃ |
| Applicable fluid viscosity | 15 ~ 400 mm²/s |
| Standard seal material | NBR nitrile rubber; FKM fluororubber optional for anti-fire oil |
About the MP-03W-20- 40，DAIKIN
The MP-03W-20- 40，DAIKIN is a electrical products used in industrial automation, control and power systems. It is rated at Nominal size 03 series, Maximum working pressure 25 MPa (250 kgf/cm²), Maximum rated flow 80 L/min. This electrical products is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number MP-03W-20- 40，DAIKIN for accurate procurement and cross-referencing.
Why source the MP-03W-20- 40，DAIKIN from HDE123
- Verified part number: every MP-03W-20- 40，DAIKIN is checked against its manufacturer specification before shipment.
- 11 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the MP-03W-20- 40，DAIKIN
To order the MP-03W-20- 40，DAIKIN, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.