Basic information model: 6SL3120-2TE15-0AD0
Device type: SINAMICS S120 dual axis motor module
Structural form: Book shaped D-type, internally air-cooled
Protection level: IP20/UL open type
Core application: Suitable for S120 DC bus system, driving two three-phase asynchronous/servo motors simultaneously, supporting vector control, V/f control, etc
Electrical core parameters DC bus voltage: DC 510-720V (rated 600VDC)
Output specifications: 2-channel independent three-phase AC output, 3AC 400V per channel, rated output current 2 × 5.0A, basic load current 2 × 4.3A
Adaptive power: Single axis maximum compatible with 3.7kW motor (400V level)
Electronic power supply: DC 24V (allowable fluctuation -15%~+20%), maximum current requirement 0.90A
Rated pulse frequency: 4.00kHz (can be optimized and adjusted)
Output frequency: up to 600Hz under V/f control
Motor cable length: shielded 50m, unshielded 75m
Physical and Environmental Parameters Dimensions: 50mm (width) x 380mm (height) x 270mm (depth)
Net weight: 4.7kg
Cooling method: Internal air cooling, cooling air demand 0.009m ³/s
Working temperature: 0-40 ℃ (without derating)
Installation altitude: No derating below 1000m
Noise level: about 60dB at 1m
Power loss: typical 0.08kW, maximum 0.13kW
Interface and functional communication interface: 4-channel DRIVE CLiQ socket, supporting communication with control units, encoders, etc
Security feature: Supports extended security integration functionality (compliant with IEC 61800-5-2)
Protection features: It has protection against overcurrent, overvoltage, overheating, short circuit, motor overload, etc
Terminal specifications: The PE terminal is an M5 screw, and the cross-sectional area of the interface cable is 1.5-6mm ² (16-10AWG)
Adaptation and Installation System: SINAMICS S120 DC/AC Common DC Bus System
Installation requirements: Vertical installation inside the control cabinet, with reserved ventilation space
Wiring specification: The motor side wiring should be shielded and follow the S120 installation manual to ensure signal stability
6SL3120-2TE15-0AD0 Siemens S120 inverter dual axis 5A motor drive module Specifications
| Basic information model | 6SL3120-2TE15-0AD0 |
|---|---|
| Device type | SINAMICS S120 dual axis motor module |
| Structural form | Book shaped D-type, internally air-cooled |
| Protection level | IP20/UL open type |
| Adaptive power | Single axis maximum compatible with 3.7kW motor (400V level) |
| Electronic power supply | DC 24V (allowable fluctuation -15%~+20%), maximum current requirement 0.90A |
| Rated pulse frequency | 4.00kHz (can be optimized and adjusted) |
| Output frequency | up to 600Hz under V/f control |
| Motor cable length | shielded 50m, unshielded 75m |
| Net weight | 4.7kg |
| Cooling method | Internal air cooling, cooling air demand 0.009m ³/s |
| Working temperature | 0-40 ℃ (without derating) |
| Installation altitude | No derating below 1000m |
| Noise level | about 60dB at 1m |
| Power loss | typical 0.08kW, maximum 0.13kW |
| Security feature | Supports extended security integration functionality (compliant with IEC 61800-5-2) |
| Protection features | It has protection against overcurrent, overvoltage, overheating, short circuit, motor overload, etc |
| Terminal specifications | The PE terminal is an M5 screw, and the cross-sectional area of the interface cable is 1.5-6mm ² (16-10AWG) |
| Adaptation and Installation System | SINAMICS S120 DC/AC Common DC Bus System |
| Installation requirements | Vertical installation inside the control cabinet, with reserved ventilation space |
| Wiring specification | The motor side wiring should be shielded and follow the S120 installation manual to ensure signal stability |
About the 6SL3120-2TE15-0AD0 Siemens S120 inverter dual axis 5A motor drive module
The 6SL3120-2TE15-0AD0 Siemens S120 inverter dual axis 5A motor drive module is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Basic information model 6SL3120-2TE15-0AD0, Device type SINAMICS S120 dual axis motor module, Structural form Book shaped D-type, internally air-cooled. This oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number 6SL3120-2TE15-0AD0 Siemens S120 inverter dual axis 5A motor drive module for accurate procurement and cross-referencing.
Why source the 6SL3120-2TE15-0AD0 Siemens S120 inverter dual axis 5A motor drive module from HDE123
- Verified part number: every 6SL3120-2TE15-0AD0 Siemens S120 inverter dual axis 5A motor drive module is checked against its manufacturer specification before shipment.
- 21 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the 6SL3120-2TE15-0AD0 Siemens S120 inverter dual axis 5A motor drive module
To order the 6SL3120-2TE15-0AD0 Siemens S120 inverter dual axis 5A motor drive module, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.