6SX7010-0FF05 Siemens Inverter CBP2 Communication Board (Old Version)

Basic information model: 6SX7010-0FF05 Device type: CBP2 communication board (PROFIBUS-DP) Brand: Siemens Adaptation system: SIMOVERT MASTERDRIVES 6SE70 series frequency converter, DC speed regulator Core purpose: Connected to the upper automation system through the PROFIBUS-DP bus to achieve control instructions, status feedback, and parameter interaction
Electrical parameter power supply method: Powered internally by the basic driving unit (no additional external power supply required) Communication protocol: PROFIBUS-DP Transmission rate: 9.6kbps -12Mbps (adaptive) Communication interface: 9-pin D-SUB (PROFIBUS-DP standard interface) Address setting: Station address (0-126) set through dip switch Status indication: 3 LED indicator lights (green/yellow/red), displaying power, communication status, and fault respectively
Protection level for physical and environmental parameters: IP20 (installed inside control cabinet) Operating temperature: 0 ℃ -40 ℃ Storage temperature: -25 ℃ -70 ℃ Relative humidity: 5% -95% (no condensation) Installation method: Installed on ADB adapter board, requires LBA bus adapter, compatible with 6SE70 series driver unit Installation position Dimensions: approximately 63mm × 145mm × 35mm (width × height × depth) Weight: approximately 0.1kg Power
Capable of protecting core functions such as PROFIBUS-DP master/slave communication, driver parameter reading and writing, control signal transmission, fault diagnosis and status feedback. Protection features include overcurrent and overvoltage protection, EMC compliance with EN 61800-3 industrial standards. Compatible with 6SE70 series driver units, ADB adapter boards, and LBA bus adapters