6SY7000-0AF11 Siemens IGBT Power Module

Basic Information Model: 6SY7000-0AF11 Device Type: IGBT Power Module (Half Bridge/Three Phase Bridge Structure, Suitable for 6SE70 Series Medium Power Units) Adaptation System: SIMOVERT MASTERDRIVES 6SE70 Series Inverter/Rectification Feedback Unit Core Application: Main Circuit Inverter/Rectification Power Switch, Achieving DC-AC/AC-DC Energy Conversion, Suitable for Medium Power Level Power Units
Electrical parameters Rated voltage: IGBT rated collector emitter voltage (Vce) 1200V DC rated current: Rated collector current (Ic) about 100A (25 ℃, subject to Siemens official manual) Diode parameters: freewheeling diode reverse peak voltage 1200V, rated forward current matched with IGBT rated current Switching frequency: Suitable for 6SE70 standard carrier frequency (2-16kHz, adjusted according to power module configuration) Driving voltage: Gate driving voltage ± 15V, Suitable for 6SE70 driving circuit conduction voltage drop: IGBT conduction voltage drop Vce (sat) ≤ 2.2V (under rated current) Insulation level: Electrical insulation complies with IEC 60664-1, insulation voltage ≥ 2500V AC
Physical and environmental parameter packaging type: modular packaging, with bolt type power terminals and signal terminals. Protection level: IP20 (installed inside the control cabinet, requiring heat dissipation system). Operating temperature: -40 ℃ -125 ℃ (junction temperature), ambient temperature: 0 ℃ -40 ℃. Storage temperature: -40 ℃ -125 ℃. Cooling method: forced air/water cooling (compatible with 6SE70 power unit heat dissipation system). Dimensions: approximately 150mm × 120mm × 60mm (width × height × depth). Weight: approximately 1.2kg
Function and Adaptation Core Functions: Power Inverter/Rectification, Continuous Current Protection, Overcurrent/Overvoltage/Overheat Protection Adaptation Components: Used in conjunction with power modules (approximately 75-110kW), driver boards, and control units in the 6SE70 series Protection Features: Equipped with short-circuit protection, overvoltage clamping, and overheat shutdown functions, in compliance with the EN 61800-3 industrial standard