Basic information model: A5E01161647
Device type: S120 series auxiliary power board
Adaptation system: S120 series motor module (MM), active circuit module (ALM), suitable for voltage levels of 380-480V/500-690V, models with power ranges of 100kW and above
Core purpose: To provide stable auxiliary power supply for control circuits, cooling fans, DRIVE CLiQ interfaces, etc. of S120 power modules, integrating power conversion, voltage monitoring, and overcurrent protection functions
Electrical core parameter input power supply: three-phase AC 380-480V (or 500-690V, adapted to the corresponding power module voltage level), 50/60Hz
Output power supply: DC 24V (main output, used for control units and interface circuits), rated output current 2A; DC 5V (auxiliary output, used for logic circuits), rated output current 0.5A
Power capacity: approximately 60W (meeting the auxiliary power supply requirements of S120 single module)
Voltage accuracy: DC 24V output accuracy ± 2%, DC 5V output accuracy ± 3%
Protection functions: Input overvoltage/undervoltage protection, output overcurrent/short circuit protection, overheating protection, automatically turn off output in case of fault
Physical and environmental parameter structure form: slot installation, compatible with S120 standard power module card slot
Protection level: IP20 (installed inside the control cabinet)
Working temperature: 0 ℃ -45 ℃ (without derating), -25 ℃ -70 ℃ (storage)
Cooling method: relying on forced air cooling of S120 cabinet
Dimensions: Approximately 150mm x 120mm x 40mm (width x height x depth)
Weight: Approximately 0.4kg
Adaptation and functional adaptation components: S120 series 6SL3120/3130 and other motor modules, 6SL3330 and other active circuit modules, CU320-2 control unit
Signal interface: DC 24V/5V output terminal, fault signal feedback terminal (dry contact), power status indicator light
Installation requirements: Anti static installation, input power supply needs to be isolated from the main circuit, wiring should match S120 system specifications
A5E01161647 Siemens PLUS inverter driver board, power board, power board driver Specifications
| Basic information model | A5E01161647 |
|---|---|
| Device type | S120 series auxiliary power board |
| Power capacity | approximately 60W (meeting the auxiliary power supply requirements of S120 single module) |
| Voltage accuracy | DC 24V output accuracy ± 2%, DC 5V output accuracy ± 3% |
| Protection level | IP20 (installed inside the control cabinet) |
| Working temperature | 0 ℃ -45 ℃ (without derating), -25 ℃ -70 ℃ (storage) |
| Cooling method | relying on forced air cooling of S120 cabinet |
| Dimensions | Approximately 150mm x 120mm x 40mm (width x height x depth) |
| Weight | Approximately 0.4kg |
| Signal interface | DC 24V/5V output terminal, fault signal feedback terminal (dry contact), power status indicator light |
About the A5E01161647 Siemens PLUS inverter driver board, power board, power board driver
The A5E01161647 Siemens PLUS inverter driver board, power board, power board driver is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Basic information model A5E01161647, Device type S120 series auxiliary power board, Power capacity approximately 60W (meeting the auxiliary power supply requirements of S120 single module). This oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number A5E01161647 Siemens PLUS inverter driver board, power board, power board driver for accurate procurement and cross-referencing.
Why source the A5E01161647 Siemens PLUS inverter driver board, power board, power board driver from HDE123
- Verified part number: every A5E01161647 Siemens PLUS inverter driver board, power board, power board driver is checked against its manufacturer specification before shipment.
- 10 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the A5E01161647 Siemens PLUS inverter driver board, power board, power board driver
To order the A5E01161647 Siemens PLUS inverter driver board, power board, power board driver, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.