JIANGSU YUANWANG INSTRUME UQK-651-C SWITCH, FLOAT LEVEL CONTROLLER 1.0MPA

1. Pressure and operating parameters:
Rated working pressure: ≤ 1.0MPa (specified in the order)
Maximum temperature of the medium: ≤ 150 ℃ (standard type at room temperature)
Applicable medium specific gravity: ≥ 0.85g/cm ³ (fuel, lubricating oil, sewage, fresh water are all acceptable)
Liquid level switching difference (action dead zone): 20-70mm
Repetitive control accuracy: ≤ 20mm
2. Structure and installation form:
Installation method: Side mounted flange horizontal installation (horizontal side mounted)
Control type: Single point two position SPDT single pole double throw switch (one set normally open+one set normally closed)
Flange standard: GB2506 marine flange, DN100 cast steel flange, in compliance with GB571-65 ship standard
Float ball specification: 304 stainless steel float ball, diameter Φ 60mm
Driving principle: magnetic coupling non-contact transmission, isolated sealing, liquid does not enter the switch chamber
3. Electrical contact parameters:
AC load: AC220V/380V, resistive 10A, inductive 0.5A
DC load: DC125V, 0.6A
Output: Passive switch signal, directly connected to PLC, alarm buzzer, solenoid valve start stop circuit
4. Protection, Explosion proof and Material:
Protection level: IP68 (can be immersed in water for a short time, resistant to salt spray and ship shaking)
Shell/Float Material: 304 Stainless Steel Body, Aluminum Alloy Wiring Shell
Explosion proof optional (same series C-B model): Ex d IIBT3~T5 explosion-proof, used in flammable and explosive oil tank areas
Environmental adaptability: resistant to moisture and heat, resistant to ship tilting and turbulence, meeting the inspection requirements of CCS classification society