1. Flow pressure performance:
Nominal displacement: 10 mL/r
Rated speed: 1450 r/min (4-stage motor)
Theoretical flow rate: 14.5 L/min
Maximum continuous working pressure: 25 bar (2.5MPa)
Built in overflow valve opening pressure: 16 bar (adjustable)
Short term peak pressure: 30 bar
2. Medium and viscosity:
Applicable media: hydraulic oil, gearbox lubricating oil, turbine oil, diesel and other clean fluids
Allowable kinematic viscosity: 1.2~20000 mm ²/s (cst)
Sealing material: standard NBR nitrile rubber, optional FKM fluororubber
3. Installation and Interface:
Installation method: flange horizontal installation
Oil outlet specification: G1/4 “pipe thread for inlet and outlet
Drive shaft: flat key shaft, standard motor direct connection/coupling drive
Pump body material: cast iron shell, wear-resistant alloy steel gear
4. Working conditions and lifespan:
Allowable oil temperature: -20 ℃~+80 ℃
Allowable oil suction vacuum degree: ≤ 0.05MPa
Continuous working system S1, low noise, high volumetric efficiency
Low pressure transmission gear pump，D-58791,KF 10 RF1 Specifications
| Nominal displacement | 10 mL/r |
|---|---|
| Rated speed | 1450 r/min (4-stage motor) |
| Theoretical flow rate | 14.5 L/min |
| Maximum continuous working pressure | 25 bar (2.5MPa) |
| Built in overflow valve opening pressure | 16 bar (adjustable) |
| Short term peak pressure | 30 bar |
| Applicable media | hydraulic oil, gearbox lubricating oil, turbine oil, diesel and other clean fluids |
| Allowable kinematic viscosity | 1.2~20000 mm ²/s (cst) |
| Sealing material | standard NBR nitrile rubber, optional FKM fluororubber |
| Installation method | flange horizontal installation |
| Oil outlet specification | G1/4 "pipe thread for inlet and outlet |
| Drive shaft | flat key shaft, standard motor direct connection/coupling drive |
| Pump body material | cast iron shell, wear-resistant alloy steel gear |
| Allowable oil temperature | -20 ℃~+80 ℃ |
| Allowable oil suction vacuum degree | ≤ 0.05MPa |
About the Low pressure transmission gear pump，D-58791,KF 10 RF1
The Low pressure transmission gear pump，D-58791,KF 10 RF1 is a electrical products used in industrial automation, control and power systems. It is rated at Nominal displacement 10 mL/r, Rated speed 1450 r/min (4-stage motor), Theoretical flow rate 14.5 L/min. This electrical products is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number Low pressure transmission gear pump，D-58791,KF 10 RF1 for accurate procurement and cross-referencing.
Why source the Low pressure transmission gear pump，D-58791,KF 10 RF1 from HDE123
- Verified part number: every Low pressure transmission gear pump，D-58791,KF 10 RF1 is checked against its manufacturer specification before shipment.
- 15 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the Low pressure transmission gear pump，D-58791,KF 10 RF1
To order the Low pressure transmission gear pump，D-58791,KF 10 RF1, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.