Basic information model: VPPL-3Q-3-0L40H-V1-A-S1-1
Product type: FESTO VPPL series direct acting piston type three-way proportional pressure valve (normally closed)
Core application: Precise pressure regulation of pneumatic systems, suitable for industrial automation scenarios such as automotive manufacturing, electronics, packaging, etc
Core features: When the power supply is interrupted, the output pressure drops to 0 bar (safe position), with reverse polarity protection, direct acting pilot, and rapid response
Pneumatic parameter pressure adjustment range: 0.04-4 MPa (0.4-40 bar)
Inlet pressure: 0-50 bar (maximum tolerance 50 bar)
Maximum pressure hysteresis: 0.04 MPa (0.4 bar)
Flow characteristics: b value 0.25, C value 0.8 l/sbar
Standard rated flow rate (DIN 1343): 282 l/min
Nominal diameter (intake/exhaust): 3 mm/3 mm
Sealing method: Soft seal, suitable for non lubricated compressed air or inert gas
Electrical parameter rated power supply: 24 V DC (working range 21.6-27.6 V DC)
Control signal input (V1): 0-10 V DC (set value)
Feedback signal output (A): 0-10 V DC (actual pressure value)
Interface type: 5-pin M12-A coding socket (diagnostic interface)
Power consumption: maximum 26.7 W, duty cycle 100%
Response time: 428 ms on, 654 ms off
Display: LED status indicator
Accuracy and Performance Comprehensive Accuracy (S1): ± 1%
Residual ripple: ≤ 10%
Reset method: mechanical spring reset
Safety features: power interruption output reset to zero, reverse polarity protection
Installation method for physical and environmental parameters: It is recommended to install vertically and support through-hole fixation
Protection level: IP65
Working temperature: 5-50 ℃
Storage temperature: -10-60 ℃
Relative humidity: ≤ 95% (no condensation)
Shell material: anodized aluminum
Weight: Approximately 0.8 kg
Interface specifications: 3-way flange pneumatic interface (1/2/3 ports), 5-pin M12-A encoded electrical interface
Certification and lifespan certification: CE, ISO 8573-1:2010 (compatible with [7:4:4] compressed air)
Mechanical lifespan: ≥ 10 million cycles
Electrical lifespan: ≥ 100000 cycles (AC-15240 V, 5A working condition)
Regulator Festo P/N: VPPL-3Q-3-0L40H-V1-A-S1-1 Specifications
| Basic information model | VPPL-3Q-3-0L40H-V1-A-S1-1 |
|---|---|
| Product type | FESTO VPPL series direct acting piston type three-way proportional pressure valve (normally closed) |
| Inlet pressure | 0-50 bar (maximum tolerance 50 bar) |
| Maximum pressure hysteresis | 0.04 MPa (0.4 bar) |
| Flow characteristics | b value 0.25, C value 0.8 l/sbar |
| Standard rated flow rate (DIN 1343) | 282 l/min |
| Nominal diameter (intake/exhaust) | 3 mm/3 mm |
| Sealing method | Soft seal, suitable for non lubricated compressed air or inert gas |
| Electrical parameter rated power supply | 24 V DC (working range 21.6-27.6 V DC) |
| Control signal input (V1) | 0-10 V DC (set value) |
| Feedback signal output (A) | 0-10 V DC (actual pressure value) |
| Interface type | 5-pin M12-A coding socket (diagnostic interface) |
| Power consumption | maximum 26.7 W, duty cycle 100% |
| Response time | 428 ms on, 654 ms off |
| Display | LED status indicator |
| Residual ripple | ≤ 10% |
| Reset method | mechanical spring reset |
| Safety features | power interruption output reset to zero, reverse polarity protection |
| Protection level | IP65 |
| Working temperature | 5-50 ℃ |
| Storage temperature | -10-60 ℃ |
| Relative humidity | ≤ 95% (no condensation) |
| Shell material | anodized aluminum |
| Weight | Approximately 0.8 kg |
About the Regulator Festo P/N: VPPL-3Q-3-0L40H-V1-A-S1-1
The Regulator Festo P/N: VPPL-3Q-3-0L40H-V1-A-S1-1 is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Basic information model VPPL-3Q-3-0L40H-V1-A-S1-1, Product type FESTO VPPL series direct acting piston type three-way proportional pressure valve (normally closed), Inlet pressure 0-50 bar (maximum tolerance 50 bar). This oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number Regulator Festo P/N: VPPL-3Q-3-0L40H-V1-A-S1-1 for accurate procurement and cross-referencing.
Why source the Regulator Festo P/N: VPPL-3Q-3-0L40H-V1-A-S1-1 from HDE123
- Verified part number: every Regulator Festo P/N: VPPL-3Q-3-0L40H-V1-A-S1-1 is checked against its manufacturer specification before shipment.
- 24 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the Regulator Festo P/N: VPPL-3Q-3-0L40H-V1-A-S1-1
To order the Regulator Festo P/N: VPPL-3Q-3-0L40H-V1-A-S1-1, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.