1. Basic Identification
Manufacturer: SEEPEX GmbH (Germany)
Applicable Pump Model: BTE 10-12 Open Hopper Progressive Cavity Pump
Spare Part No.: 183084
Component Code in Pump Drawing: Rotor (Item 600)
Pump Series Type: BT Hopper pump, 10 frame size, 12 stage single helical geometry
2. Geometry & Dimensional Specifications
Rotor Profile: Single start helical screw, standard 1:2 eccentricity progressive cavity rotor
Nominal Rotor Diameter: Ø38 mm
Pitch Length: 120 mm per full helical turn
Effective Working Length (stator engagement segment): 480 mm
Total Overall Length (including drive tang mounting head): 565 mm
Drive End Connection: Flat tang with 2× mounting pin holes (match coupling rod 400)
Outlet Tip: Rounded smooth end for low abrasion pumping media with solids
3. Material & Surface Treatment (Standard OEM 183084)
Base Material: AISI 316L Stainless Steel (food & chemical standard)
Surface Coating: Hard Chrome plating (minimum 80 μm thickness)
Alternative Material Options for Custom 183084 variants:
Duplex 1.4462 (for corrosive wastewater / brine)
420 Stainless Steel hardened (abrasive sludge, sand media)
Surface Finish: Ra ≤ 0.8 μm polished, no sharp edges to damage stator elastomer
4. Weight Data
Net Weight (OEM chrome-plated 316L rotor p/n 183084): 6.8 kg / 14.99 lbs
Gross Packing Weight (rotor + anti-rust oil + wooden crate): ~7.6 kg
5. Compatibility & Performance Matching
Matching Stator Model for BTE 10-12: Stator p/n matched with rotor 183084 (standard NBR / EPDM / NR elastomer)
Max Operating Pressure with this rotor assembly: 12 bar single stage
Allowable Rotation Speed Range: 10 – 450 rpm
Media Compatibility: Food slurry, sludge, paste, viscous wastewater, medium solid content (<8% particle volume)
Temperature Range: -20 °C to +90 °C (316L chrome version)
6. Mechanical & Wear Characteristics
Hardness after chrome plating: HV ≥ 850
Eccentricity Tolerance: ±0.02 mm full length runout
Key Matching: Fits standard BTE 10-12 universal joint coupling rod assembly
Maintenance Note: Rotor 183084 is interchangeable with aftermarket BTE10-12 rotors with identical helical geometry; tang hole position must align for direct replacement
7. Application Matching Pump Parameters (Reference for Rotor Working Condition)
Pump Model: BTE 10-12
Max Flow Rate: 12 m³/h
Rated Differential Pressure: 12 bar
Hopper Feed Design: Rectangular open feed with integral ribbon feed screw upstream of rotor-stator unit
Rotor for Seepex Pump BTE 10-12 p/n 183084 Specifications
| Manufacturer | SEEPEX GmbH (Germany) |
|---|---|
| Applicable Pump Model | BTE 10-12 Open Hopper Progressive Cavity Pump |
| Spare Part No | 183084 |
| Component Code in Pump Drawing | Rotor (Item 600) |
| Pump Series Type | BT Hopper pump, 10 frame size, 12 stage single helical geometry |
| Rotor Profile | Single start helical screw, standard 1:2 eccentricity progressive cavity rotor |
| Nominal Rotor Diameter | Ø38 mm |
| Pitch Length | 120 mm per full helical turn |
| Drive End Connection | Flat tang with 2× mounting pin holes (match coupling rod 400) |
| Outlet Tip | Rounded smooth end for low abrasion pumping media with solids |
| Base Material | AISI 316L Stainless Steel (food & chemical standard) |
| Surface Coating | Hard Chrome plating (minimum 80 μm thickness) |
| Surface Finish | Ra ≤ 0.8 μm polished, no sharp edges to damage stator elastomer |
| Matching Stator Model for BTE 10-12 | Stator p/n matched with rotor 183084 (standard NBR / EPDM / NR elastomer) |
| Allowable Rotation Speed Range | 10 |
| Media Compatibility | Food slurry, sludge, paste, viscous wastewater, medium solid content (<8% particle volume) |
| Temperature Range | -20 °C to +90 °C (316L chrome version) |
| Hardness after chrome plating | HV ≥ 850 |
| Eccentricity Tolerance | ±0.02 mm full length runout |
| Key Matching | Fits standard BTE 10-12 universal joint coupling rod assembly |
| Pump Model | BTE 10-12 |
| Max Flow Rate | 12 m³/h |
| Rated Differential Pressure | 12 bar |
| Hopper Feed Design | Rectangular open feed with integral ribbon feed screw upstream of rotor-stator unit |
About the Rotor for Seepex Pump BTE 10-12 p/n 183084
The SEEPEX GmbH (Germany) Rotor for Seepex Pump BTE 10-12 p/n 183084 is a drive products used in industrial automation, control and power systems. It is rated at Manufacturer SEEPEX GmbH (Germany), Applicable Pump Model BTE 10-12 Open Hopper Progressive Cavity Pump, Spare Part No 183084. Manufactured by SEEPEX GmbH (Germany), this drive products is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number Rotor for Seepex Pump BTE 10-12 p/n 183084 for accurate procurement and cross-referencing.
Why source the Rotor for Seepex Pump BTE 10-12 p/n 183084 from HDE123
- Verified part number: every Rotor for Seepex Pump BTE 10-12 p/n 183084 is checked against its manufacturer specification before shipment.
- 24 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the Rotor for Seepex Pump BTE 10-12 p/n 183084
To order the SEEPEX GmbH (Germany) Rotor for Seepex Pump BTE 10-12 p/n 183084, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.