Parameter Category Specifications
Basic Dimensions – Inner Diameter: 86 mm
– Cross Section (Wire Diameter): 6
mm
– Outer Diameter: 98 mm (calculated
as 86 + 2×6)
– Quantity per Set: 2 pcs (marked on
the certificate in the image)
Material (Typical for HV-108)
Green rubber (commonly FKM
(Viton®) or EPDM for industrial
equipment):
– FKM (Viton®): Suitable for high
temperature (≤205°C) and
oil/chemical resistance
– EPDM: Suitable for water/steam
resistance (temperature: -40°C ~
+150°C)
Performance Parameters
– Working Temperature: -30°C ~
+205°C (FKM) or -40°C ~ +150°C
(EPDM)
– Working Pressure: Static seal ≤20
MPa (without backup ring);
Dynamic seal ≤5 MPa
– Hardness: 70~75 Shore A
(standard for industrial O-rings)
Application
Sealing component for HV-108
equipment (e.g., hydraulic valve,
pump, or pressure vessel in
industrial systems)
Standards Compliance
Conforms to GB/T 3452.1-2005
(Chinese national standard) or ISO
3601 (international standard)
O-RING 86 X 6/SET FOR HV-108 86 X 6 Specifications
| Inner Diameter | 86 mm |
|---|---|
| Cross Section (Wire Diameter) | 6 |
| Outer Diameter | 98 mm (calculated |
| Quantity per Set | 2 pcs (marked on |
| FKM (Viton®) | Suitable for high |
| EPDM | Suitable for water/steam |
| resistance (temperature | -40°C ~ |
| Working Temperature | -30°C ~ |
| Working Pressure | Static seal ≤20 |
| Hardness | 70~75 Shore A |
About the O-RING 86 X 6/SET FOR HV-108 86 X 6
The O-RING 86 X 6/SET FOR HV-108 86 X 6 is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Inner Diameter 86 mm, Cross Section (Wire Diameter) 6, Outer Diameter 98 mm (calculated. This oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number O-RING 86 X 6/SET FOR HV-108 86 X 6 for accurate procurement and cross-referencing.
Why source the O-RING 86 X 6/SET FOR HV-108 86 X 6 from HDE123
- Verified part number: every O-RING 86 X 6/SET FOR HV-108 86 X 6 is checked against its manufacturer specification before shipment.
- 10 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the O-RING 86 X 6/SET FOR HV-108 86 X 6
To order the O-RING 86 X 6/SET FOR HV-108 86 X 6, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.