Basic information model: WATSN 4P 32/160/630A
Brand: Schneider Wingoal
Type: PC level (no overcurrent trip, load switch type)/CB level (with overcurrent trip, circuit breaker type)
Number of poles: 4 poles (4P, L1/L2/L3+N)
Controller: Type A (basic type)/Type B (enhanced type), supports self switching and self recovery/self switching but not self recovery/mutual backup
Mechanical interlocking: Dual mechanical and electrical interlocking to prevent the simultaneous closing of two power sources
Installation method: 35mm DIN rail or screw installation
Protection level: IP20
Wiring method: Screw clamped terminals, compatible with 1.5-35mm ² wires
Size: varies with the shell frame, for example, 63A is approximately 100mm wide x 180mm high x 100mm deep; 630A is approximately 250mm wide x 300mm high x 150mm deep
Weight: Approximately 0.8kg for 32A and 5.5kg for 630A
Electrical parameters Rated insulation voltage (Ui): 690V AC
Rated operating voltage (Ue): 380/400/415V AC (50/60Hz), suitable for ≤ 690V AC systems
Rated working current (Ie): 32/63/100/160/250/400/630A (divided)
Rated short-time withstand current (Icw, 1s): PC grade 63A/160A/630A are 10kA/15kA/25kA respectively; CB level circuit breaker (e.g. iC65H is 10kA, NSX is 50kA)
Rated connection/disconnection capacity: PC grade AC-33B 10Ie; CB level circuit breaker with the same breaking capacity
Controller power supply: 220V AC (default), optional 110V AC/24V DC
Switching time: Standard type ≤ 250ms, fast type ≤ 80ms (adjustable)
Mechanical and lifespan: PC grade ≥ 8000 cycles; CB level ≥ 5000 times
Electrical lifespan: ≥ 1000 cycles under AC-33B operating conditions
Operating frequency: ≤ 120 times/hour (automatic), ≤ 30 times/hour (manual)
Drive mode: single motor drive, smooth and impact free
Environment and certification working temperature: -25 ℃ to+60 ℃ (>60 ℃ derating)
Storage temperature: -40 ℃ to+85 ℃
Relative humidity: 5% -95% (no condensation)
Anti vibration: 10-55Hz, 0.15mm; 55–150Hz，5m/s²
Impact resistance: 15g (11ms)
Certification: CE, UL, CSA, CCC, EAC
Core function power monitoring: overvoltage, undervoltage, phase loss, and voltage loss detection, with adjustable threshold
Switching logic: self switching and self recovery (common recovery priority), self switching but not self recovery (backup continuous power supply), mutual backup (no priority)
Manual/Automatic Interlocking: Manual operation is prohibited in automatic mode, and manual switching can be forced in emergency situations
Status indication: LED displays power/running/fault status, supports remote signal feedback
Schneider Wangao Dual Power Automatic Transfer Switch WATSN 4P 32A Specifications
| Basic information model | WATSN 4P 32/160/630A |
|---|---|
| Brand | Schneider Wingoal |
| Type | PC level (no overcurrent trip, load switch type)/CB level (with overcurrent trip, circuit breaker type) |
| Number of poles | 4 poles (4P, L1/L2/L3+N) |
| Mechanical interlocking | Dual mechanical and electrical interlocking to prevent the simultaneous closing of two power sources |
| Installation method | 35mm DIN rail or screw installation |
| Protection level | IP20 |
| Wiring method | Screw clamped terminals, compatible with 1.5-35mm ² wires |
| Weight | Approximately 0.8kg for 32A and 5.5kg for 630A |
| Rated operating voltage (Ue) | 380/400/415V AC (50/60Hz), suitable for ≤ 690V AC systems |
| Rated working current (Ie) | 32/63/100/160/250/400/630A (divided) |
| Rated connection/disconnection capacity | PC grade AC-33B 10Ie; CB level circuit breaker with the same breaking capacity |
| Controller power supply | 220V AC (default), optional 110V AC/24V DC |
| Switching time | Standard type ≤ 250ms, fast type ≤ 80ms (adjustable) |
| Mechanical and lifespan | PC grade ≥ 8000 cycles; CB level ≥ 5000 times |
| Electrical lifespan | ≥ 1000 cycles under AC-33B operating conditions |
| Operating frequency | ≤ 120 times/hour (automatic), ≤ 30 times/hour (manual) |
| Drive mode | single motor drive, smooth and impact free |
| Storage temperature | -40 ℃ to+85 ℃ |
| Relative humidity | 5% -95% (no condensation) |
| Anti vibration | 10-55Hz, 0.15mm; 55–150Hz，5m/s² |
| Impact resistance | 15g (11ms) |
| Certification | CE, UL, CSA, CCC, EAC |
| Core function power monitoring | overvoltage, undervoltage, phase loss, and voltage loss detection, with adjustable threshold |
About the Schneider Wangao Dual Power Automatic Transfer Switch WATSN 4P 32A
The Schneider Wingoal Schneider Wangao Dual Power Automatic Transfer Switch WATSN 4P 32A is a oil drilling equipment used in industrial automation, control and power systems. It is rated at Basic information model WATSN 4P 32/160/630A, Brand Schneider Wingoal, Type PC level (no overcurrent trip, load switch type)/CB level (with overcurrent trip, circuit breaker type). Manufactured by Schneider Wingoal, this oil drilling equipment is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number Schneider Wangao Dual Power Automatic Transfer Switch WATSN 4P 32A for accurate procurement and cross-referencing.
Why source the Schneider Wangao Dual Power Automatic Transfer Switch WATSN 4P 32A from HDE123
- Verified part number: every Schneider Wangao Dual Power Automatic Transfer Switch WATSN 4P 32A is checked against its manufacturer specification before shipment.
- 24 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the Schneider Wangao Dual Power Automatic Transfer Switch WATSN 4P 32A
To order the Schneider Wingoal Schneider Wangao Dual Power Automatic Transfer Switch WATSN 4P 32A, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.