1. Material: CR/Neoprene foam sponge with closed cell structure ASTM D1056
2. Density: 0.18-0.20 g/cm ³ (180-200 kg/m ³) ISO 845
3. Hardness: Asker C 15 ± 5/Shore 00 48 ± 5 JIS K6767
4. Tensile strength: ≥ 520 kPa (0.52MPa) ASTM D412
5. Elongation at break: ≥ 150% ASTM D412
6. Tear strength: ≥ 2.8 kN/m ASTM D624
7.25% compression deflection: 48 kPa ASTM D1056
8. Compression permanent deformation: (72 ℃× 24h) ≤ 25% ISO 1856
9. Temperature resistance and environmental performance:
Continuous long-term use temperature: -40 ℃~+90 ℃
Intermittent short-term peak temperature: up to 120 ℃
Ozone resistance: 50pphm, 40 ℃, 100h without cracking
Weather resistance/UV resistance: excellent, not prone to aging and cracking outdoors
Water absorption rate: ≤ 5% (closed cell structure waterproof and water-resistant)
10. Dielectric tolerance characteristics
✅ Advantages: Resistant to lubricating oil, hydraulic oil, weak acid and alkali, seawater, moisture, ozone aging
⚠️ Shortcoming: Not resistant to strong solvents (acetone, toluene, esters)
SIDE SEAL(NEOPRENT SPONGE)5.3 MM Specifications
| 1. Material | CR/Neoprene foam sponge with closed cell structure ASTM D1056 |
|---|---|
| 2. Density | 0.18-0.20 g/cm ³ (180-200 kg/m ³) ISO 845 |
| 3. Hardness | Asker C 15 ± 5/Shore 00 48 ± 5 JIS K6767 |
| 4. Tensile strength | ≥ 520 kPa (0.52MPa) ASTM D412 |
| 5. Elongation at break | ≥ 150% ASTM D412 |
| 6. Tear strength | ≥ 2.8 kN/m ASTM D624 |
| 7.25% compression deflection | 48 kPa ASTM D1056 |
| 8. Compression permanent deformation | (72 ℃× 24h) ≤ 25% ISO 1856 |
| Continuous long-term use temperature | -40 ℃~+90 ℃ |
| Intermittent short-term peak temperature | up to 120 ℃ |
| Ozone resistance | 50pphm, 40 ℃, 100h without cracking |
| Weather resistance/UV resistance | excellent, not prone to aging and cracking outdoors |
| Water absorption rate | ≤ 5% (closed cell structure waterproof and water-resistant) |
| ?? Advantag | s: Resistant to lubricating oil, hydraulic oil, weak acid and alkali, seawater, moisture, ozone aging |
| ??️ Shortcomi | g: Not resistant to strong solvents (acetone, toluene, esters) |
About the SIDE SEAL(NEOPRENT SPONGE)5.3 MM
The SIDE SEAL(NEOPRENT SPONGE)5.3 MM is a hydraulic & pneumatic products used in industrial automation, control and power systems. It is rated at 1. Material CR/Neoprene foam sponge with closed cell structure ASTM D1056, 2. Density 0.18-0.20 g/cm ³ (180-200 kg/m ³) ISO 845, 3. Hardness Asker C 15 ± 5/Shore 00 48 ± 5 JIS K6767. This hydraulic & pneumatic products is supplied as new, original industrial-grade stock. Each unit is identified by manufacturer part number SIDE SEAL(NEOPRENT SPONGE)5.3 MM for accurate procurement and cross-referencing.
Why source the SIDE SEAL(NEOPRENT SPONGE)5.3 MM from HDE123
- Verified part number: every SIDE SEAL(NEOPRENT SPONGE)5.3 MM is checked against its manufacturer specification before shipment.
- 15 confirmed technical parameters available on this page for engineering review.
- Global delivery with clear lead time and commercial invoice for B2B buyers.
- Fast B2B support: send us the equipment model or an existing part number and our engineers confirm compatibility before you order.
Ordering the SIDE SEAL(NEOPRENT SPONGE)5.3 MM
To order the SIDE SEAL(NEOPRENT SPONGE)5.3 MM, add it to your cart and complete checkout, or use the Request a Quote form for volume purchases and replacement / cross-reference enquiries. Lead time: typically 3–10 working days for in-stock items, subject to confirmation. Worldwide shipping is available and a commercial invoice is provided for customs.